Error 2 (beeps 2)
iRobot Roomba Error 2 (beeps 2): Clear the Brushes (Main Brush Stall)
Applies to: iRobot Roomba. Meanings can vary by model — trust the voice alert on your unit.
What does Error 2 (beeps 2) mean?
Roomba Error 2 (“Clear the brushes, then press CLEAN”) means the main / multi-surface brushes cannot turn — tangled debris or thick carpet drag. Official guidance: clean weekly; test on hard floor if it only fails on high-pile rugs.
How do I fix Error 2 (beeps 2)?
- Remove the brushes and clear hair from the rollers and end caps.
- Test briefly with brushes removed if your series allows it — if Error 2 clears, the brushes or ends were binding.
- Reinstall clean brushes and run on hard floor.
- Reboot by holding power ~10 seconds off-dock, then 3 seconds on.
- If Error 2 persists after cleaning and reboot, replace the brushes or request drive repair.
Error 2 (beeps 2) — fix guides by model
Dock layout, brush position, and parts differ by model — open the guide for your unit.
Still stuck?
Run free diagnosis for a guided path, or book a Brisbane meetup if DIY is not enough.