Maytronics Dolphin Dolphin M700: Floating cable kinks / tangles
Where to look: Floating cable between PSU and robot.
Floating cable has kinks that affect movement and coverage.
_On Maytronics Dolphin Dolphin M700, start with the filter/impeller path before assuming a drive or battery fault._
Picture
What you might notice
- Cable kinks
- Limited reach
Can I DIY this?
Easy DIY (~10-20 min) on Maytronics Dolphin Dolphin M700. Clear debris first; replace a worn brush/filter only if cleaning fails. If the same alert comes back after a clean install, book a Brisbane meetup.
What you need
- None — outdoor sun space
Do this
- Clean filter and impeller (kinks often accompany heavy load).
- Stretch the floating cable fully and leave it in the sun for at least a day to relax kinks.
- Keep enough slack to cover the pool without excess pile. If cable is damaged, request repair/replacement.
Parts (only if cleaning fails)
- None for a basic clean
Official references
- https://www.poolspa.co.th/wp-content/uploads/2025/07/PS-MANUAL-Robot-Pool-Cleaner-DOLPHIN-M700-English.pdf
- https://manuals.maytronics.com/intro/?pn=99996710-EU
Still stuck?
Parts for this fix
Prefer buying the part and DIY when safe — round-trip postage often rivals a new machine. Ship docks only if we ask.
- Power supply / floating cableSearch Amazon AU →
As an Amazon Associate, BotRescue may earn from qualifying purchases. Prices and stock are on Amazon AU. · campaign guide-dolphin-dolphin-m700