Maytronics Dolphin Dolphin M700: Does not climb walls / waterline
Where to look: Filters, impeller, cable slack, water chemistry.
Dolphin does not climb walls or move sideways on the waterline.
_On Maytronics Dolphin Dolphin M700, start with the filter/impeller path before assuming a drive or battery fault._
Picture
What you might notice
- Will not climb
- Slips on walls
Can I DIY this?
Easy DIY (~10-20 min) on Maytronics Dolphin Dolphin M700. Clear debris first; replace a worn brush/filter only if cleaning fails. If the same alert comes back after a clean install, book a Brisbane meetup.
What you need
- Soft cloth
- Garden hose
Do this
- Keep water ~6–35°C (ideally above 15°C). Balance chemicals; scrub algae/biofilm. Disable Floor Only / Fast mode if set by mistake.
- Clean filters (Ultra-Fine should rinse back toward white; else replace or try Net filters). Clear impeller debris.
- If handle is adjustable, set it diagonally. Ensure enough floating cable to reach walls without yanking back — not excessive length.
- If climbing still fails, request repair.
Parts (only if cleaning fails)
- Filter media
Official references
- https://www.maytronics.com/global/support/faq/?question=my-dolphin-does-not-climb-up-the-walls-or-move-sideways-on-the-waterline
- https://www.poolspa.co.th/wp-content/uploads/2025/07/PS-MANUAL-Robot-Pool-Cleaner-DOLPHIN-M700-English.pdf
- https://manuals.maytronics.com/intro/?pn=99996710-EU
Still stuck?
Parts for this fix
Prefer buying the part and DIY when safe — round-trip postage often rivals a new machine. Ship docks only if we ask.
- Filter mediaSearch Amazon AU →
As an Amazon Associate, BotRescue may earn from qualifying purchases. Prices and stock are on Amazon AU. · campaign guide-dolphin-dolphin-m700