Roborock Qrevo Curv 2 Flow: Fan speed lowered / weak suction — filter blocked
Where to look: Robot dustbin washable filter (and dustbin itself).
Official “fan speed lowered” guidance: check a blocked strainer/filter and replace the filter if cleaning does not restore suction. Wet filters must dry thoroughly before reuse.
Picture
What you might notice
- Fan speed lowered alert
- Weak suction / dust falling out
- Filter looks grey or damp
Can I DIY this?
Medium DIY (~15 min + up to 24 h drying) on Roborock Qrevo Curv 2 Flow. Work through the steps once carefully. If you lack tools or the fault returns the same day, stop and use meetup / mail-in instead of forcing sealed parts.
What you need
- Clean water
- Soft cloth
Do this
- Empty the dustbin. Remove the washable filter.
- Rinse the filter repeatedly and tap out dirt. Do not scrub the filter media with brushes or fingers.
- Allow at least 24 hours for the filter to dry thoroughly (use a spare filter if you have one).
- Wash the dustbin, dry it, reinstall filter and bin firmly.
- If the fan-speed / weak-suction error continues with a dry clean filter, replace the filter. If it still fails, request fan (Error 18 path) repair — do not open the fan housing.
Parts (only if cleaning fails)
- Washable filter
- Vacuum fan module (service if Error 18 persists)
Official references
- https://support.roborock.com/hc/en-us/articles/360035731751-What-should-I-do-when-fan-speed-lowered-error-occurs
- https://support.roborock.com/hc/en-us/article_attachments/900001170566
- https://support.roborock.com/hc/en-us/article_attachments/48479339944089
Still stuck?
Parts for this fix
Prefer buying the part and DIY when safe — round-trip postage often rivals a new machine. Ship docks only if we ask.
- Washable filterSearch Amazon AU →
- Vacuum fan module (service if Error 18 persists)Search Amazon AU →
As an Amazon Associate, BotRescue may earn from qualifying purchases. Prices and stock are on Amazon AU. · campaign guide-roborock-qrevo-curv-2-flow