BotRescueBotRescue

Side brush jammed — Error 6

Where to look: underside / top sensors as described in the steps.

Roborock Error 6 means the side brush cannot spin — usually hair or string around the brush or shaft. (Main brush jams are Error 5 on S7/S8/Q manuals; drive-wheel jams are Error 7.)

_Legacy Roborock brand hub guide — steps match official Error tables for S7/S8/Q-class robots._

What you might notice

  • Error 6 / side brush jammed
  • Side brush not spinning
  • Unusual noise from the side brush

Can I DIY this?

Easy DIY (~10-15 min). Follow the steps once. Stop if you hit sealed motors or a lithium pack — use meetup / mail-in.

What you need

  • Screwdriver (usually one screw)
  • Soft cloth
  • Scissors or pick for hair

Do this

    • Power off. Flip the robot and locate the side brush (usually one screw).
    • Remove the side brush. Clear hair and string from the brush bristles and the shaft.
    • Reinstall the brush firmly so it seats flat, then restart cleaning.
    • If Error 6 returns with a clean, free-spinning brush, request side-brush motor repair.
    • If your alert is Error 5 instead, clean the main brush and bearings. If it is Error 7, clear the drive wheels (see the drive-wheel guide).

Parts (only if cleaning fails)

  • Side brush

Official references

  • https://support.roborock.com/hc/en-us/article_attachments/8737236175641
  • https://support.roborock.com/hc/en-us/article_attachments/900008254623

Still stuck?

Free diagnosis · Brisbane meetup / mail-in

Parts for this fix

Prefer buying the part and DIY when safe — round-trip postage often rivals a new machine. Ship docks only if we ask.

Parts link →

As an Amazon Associate, BotRescue may earn from qualifying purchases. Prices and stock are on Amazon AU. · campaign guide-roborock