iRobot Roomba j7+: Clean Base evac clogged / will not empty
Where to look: Clean Base debris port and robot bin evac flap.
Clean Base will not empty the bin; clogged message or blinking red on Auto-Fill dock.
Picture
What you might notice
- Evac clogged
- Bin not emptying
- Blinking red on dock
Can I DIY this?
Easy DIY (~15-25 min) on iRobot Roomba j7+. Clear debris first; replace a worn brush/filter only if cleaning fails. If the same alert comes back after a clean install, book a Brisbane meetup.
What you need
- Soft dry cloth
Do this
- Remove robot. Reseat the bin; check the green evac flap on the bin bottom is clear.
- Clear debris from the Clean Base evacuation port underneath.
- Unplug the base, remove underside evacuation tubing, clear debris, reassemble upright.
- Redock the robot and try Empty Bin again. If it persists, request repair.
Parts (only if cleaning fails)
- Clean Base dust bag if full/missing (solid red often means bag)
Official references
- https://homesupport.irobot.com/s/article/90006
Still stuck?
Parts for this fix
Prefer buying the part and DIY when safe — round-trip postage often rivals a new machine. Ship docks only if we ask.
- Clean Base dust bag if full/missing (solid red often means bag)Search Amazon AU →
As an Amazon Associate, BotRescue may earn from qualifying purchases. Prices and stock are on Amazon AU. · campaign guide-roomba-roomba-j7+