BotRescueBotRescue

iRobot Roomba s9+: Clean Base evac clogged / will not empty

Where to look: Clean Base debris port and robot bin evac flap.

Clean Base will not empty the bin; clogged message or blinking red on Auto-Fill dock.

Picture

Clean Base evac clogged / will not empty

What you might notice

  • Evac clogged
  • Bin not emptying
  • Blinking red on dock

Can I DIY this?

Easy DIY (~15-25 min) on iRobot Roomba s9+. Clear debris first; replace a worn brush/filter only if cleaning fails. If the same alert comes back after a clean install, book a Brisbane meetup.

What you need

  • Soft dry cloth

Do this

    • Remove robot. Reseat the bin; check the green evac flap on the bin bottom is clear.
    • Clear debris from the Clean Base evacuation port underneath.
    • Unplug the base, remove underside evacuation tubing, clear debris, reassemble upright.
    • Redock the robot and try Empty Bin again. If it persists, request repair.

Parts (only if cleaning fails)

  • Clean Base dust bag if full/missing (solid red often means bag)

Official references

  • https://homesupport.irobot.com/s/article/90006

Still stuck?

Free diagnosis · Brisbane meetup / mail-in

Parts for this fix

Prefer buying the part and DIY when safe — round-trip postage often rivals a new machine. Ship docks only if we ask.

Parts link →

As an Amazon Associate, BotRescue may earn from qualifying purchases. Prices and stock are on Amazon AU. · campaign guide-roomba-roomba-s9+