Figure: Maintenance / repair assessment (AU)
Where to look: Vendor status screen / app alerts, battery bay, and joint housings — inspection only.
AU assessment path for this humanoid platform: confirm safe power-down, capture error logs/photos, and book specialist service — not a consumer DIY tear-down guide.
_Assessment hub only. These platforms are not treated as home DIY robots on BotRescue._
What you might notice
- Vendor fault code or app alert
- Unexpected stop / limp / e-stop
- Battery or joint warning after normal use
Can I DIY this?
Hard / assessment only. Capture evidence, then stop. Sealed actuators, high-voltage packs, and compute stacks are meetup/mail-in territory — see repair.
What you need
- Official charger / power procedure from the vendor guide
- Phone camera for logs and labels
Do this
- Stop motion and place the robot in the vendor-safe pose on a clear flat floor.
- Power down using the official sequence only — do not improvise battery disconnects under load.
- Photograph the model label, fault screen/app codes, and any damaged joint or sensor area.
- Note firmware version and the last action before the fault.
- Do not open sealed actuators, packs, or compute bays. Request Brisbane meetup / mail-in assessment with the photos and logs.
Parts (only if cleaning fails)
- OEM parts only after assessment
Official references
- Vendor support / documentation portal for your exact SKU (start from the brand site support page)
- https://botrescue.com.au/repair
Still stuck?
Parts for this fix
Prefer buying the part and DIY when safe — round-trip postage often rivals a new machine. Ship docks only if we ask.
- OEM parts only after assessmentSearch Amazon AU →
As an Amazon Associate, BotRescue may earn from qualifying purchases. Prices and stock are on Amazon AU. · campaign guide-figure