BotRescueBotRescue

Fourier: Maintenance / repair assessment (AU)

Where to look: Vendor status screen / app alerts, battery bay, and joint housings — inspection only.

AU assessment path for this humanoid platform: confirm safe power-down, capture error logs/photos, and book specialist service — not a consumer DIY tear-down guide.

_Assessment hub only. These platforms are not treated as home DIY robots on BotRescue._

What you might notice

  • Vendor fault code or app alert
  • Unexpected stop / limp / e-stop
  • Battery or joint warning after normal use

Can I DIY this?

Hard / assessment only. Capture evidence, then stop. Sealed actuators, high-voltage packs, and compute stacks are meetup/mail-in territory — see repair.

What you need

  • Official charger / power procedure from the vendor guide
  • Phone camera for logs and labels

Do this

    • Stop motion and place the robot in the vendor-safe pose on a clear flat floor.
    • Power down using the official sequence only — do not improvise battery disconnects under load.
    • Photograph the model label, fault screen/app codes, and any damaged joint or sensor area.
    • Note firmware version and the last action before the fault.
    • Do not open sealed actuators, packs, or compute bays. Request Brisbane meetup / mail-in assessment with the photos and logs.

Parts (only if cleaning fails)

  • OEM parts only after assessment

Official references

  • Vendor support / documentation portal for your exact SKU (start from the brand site support page)
  • https://botrescue.com.au/repair

Still stuck?

Free diagnosis · Brisbane meetup / mail-in

Parts for this fix

Prefer buying the part and DIY when safe — round-trip postage often rivals a new machine. Ship docks only if we ask.

Parts link →

As an Amazon Associate, BotRescue may earn from qualifying purchases. Prices and stock are on Amazon AU. · campaign guide-fourier