Zodiac TX20 Tornax: No power / will not start
Where to look: Control unit and outlet.
No power to the cleaner or unit will not start.
_On Zodiac TX20 Tornax, start with the filter/impeller path before assuming a drive or battery fault._
Picture
What you might notice
- Control unit off
Can I DIY this?
Easy DIY (~10-20 min) on Zodiac TX20 Tornax. Clear debris first; replace a worn brush/filter only if cleaning fails. If the same alert comes back after a clean install, book a Brisbane meetup.
What you need
- None
Do this
- Confirm wall outlet has power. Ensure unit is ON.
- Turn the tracks by hand, disconnect control unit, wait ≥20 seconds, reconnect.
- Reseat floating cable into the control unit. If unresolved, contact Zodiac Care AU 1300 763 021 / request repair.
Parts (only if cleaning fails)
- None for a basic clean
Official references
- https://assets.eu.ctfassets.net/au38h2e94wka/4VJsVuO8xd17TLhWUp7EpJ/b8e8c224859f8ab369ff0565d117f4a6/H0585900_REVA_Tornax_manual.PDF
- https://poolbuilderspoolshop.com.au/wp-content/uploads/2021/11/TX30-Owners-Manual.pdf
- https://roboticsrepair.com.au/wp-content/uploads/2023/08/CX35-Zodiac-User-Manual.pdf
Still stuck?
Parts for this fix
Prefer buying the part and DIY when safe — round-trip postage often rivals a new machine. Ship docks only if we ask.
- Power supply / floating cableSearch Amazon AU →
As an Amazon Associate, BotRescue may earn from qualifying purchases. Prices and stock are on Amazon AU. · campaign guide-zodiac-tx20-tornax